Our team will give you expert advice and guidance on the entire design and specification process including our extensive product range, including key considerations and optional extras and our dedicated bespoke service
Add a Striking Architectural Touch
Prioritising inhabitant wellbeing and sustainable performance, the Glazing Vision Flushglaze Multi-Part Rooflight is designed to flood any space, from homes to major commercial hubs, with natural daylight.
This expansive glazing system is comprised of multiple panes joined to optimise daylight penetration, which is proven to boost occupant mood, concentration, and circadian health.
Its customisation and capacity to span large areas make it a versatile rooflight for any building; Silicone seals can achieve a frameless internal aesthetic whereas if you are opting for a larger unit and need stronger structural support, you can opt for sleek aluminium angles or glass fins, which deliver an elegant, all-glass finish. The bespoke sizing and glass options ensure this rooflight integrates seamlessly into any project, adding lasting architectural value.
Key features
Optional extras
Speak to an Expert
Technical Specification Manager details not found
We're sorry, but we couldn't find a Technical Specification Manager for this area.
Your TSM
Specification
Min span |
400mm |
Max span |
4131mm |
Min width |
400mm |
Max width |
4313mm |
Min upstand pitch |
3 Degrees |
Max upstand pitch |
70 Degrees |
Glazing Vision recommends a pitch of at least 5° for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Flushglaze Multi-Part Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The standard Flushglaze Multi-Part Rooflight has been thoroughly tested and achieved the following classification results:
Size: 2000 mm span x 2500 mm width, Pitch: 0°
Air Permeability - EN 12207 - Class 4 + 600Pa
Water Tightness - EN 12208 - Class 9A 600Pa
The Multi-Part Flushglaze Rooflight has been expertly designed with security as a priority - The product is tested to LPS2081 Issue 1:2015, approved by the Loss Prevention Certification Board (Cert/LPCB ref: 1347a) and Secured by Design.
To achieve Security Rating A, the inner pane must be at least 8.8 mm PVB laminated glass (two 4 mm thick panes separated by an 0.8 mm thick PVB interlayer).
To achieve Security Rating B, the inner pane must be at least 9.5 mm ionomer laminated glass (two 4 mm thick panes separated by a 1.5 mm thick ionomer interlayer).
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on
Flushglaze Fixed Multipart Rooflight
Flushglaze Fixed Rooflight
Flushglaze Circular Fixed Rooflight
Flushglaze Wall Abutted Rooflight
Flushglaze Eaves Rooflight
Flushglaze Walk On Rooflight