Our team will give you expert advice and guidance on the entire design and specification process, including our extensive product range, key considerations, optional extras, and our dedicated bespoke service
Blend seamlessly with your architecture
For over 20 years, the Flushglaze Fixed Rooflight has been the foundation of Glazing Vision's commitment to maximising natural daylight through minimalistic design.
Designed with sustainability in mind, the rooflight’s core principle, 'Minimal Framework, Maximal Daylight', maximises natural light ingress. This abundance of daylight is proven to boost wellbeing, concentration, and mood, placing human experience at the center of the design.
By providing 'Sky Only' views, the Flushglaze Fixed Rooflight effortlessly dissolves the boundary between the interior and the environment, acting as a sustainable investment in a healthier, brighter space.
Key features
Optional extras
Specification
Min span |
400mm |
Max span |
4313mm |
Min Width |
400mm |
Max Width |
4313mm |
Min upstand pitch |
3 Degrees |
Max upstand pitch |
70 Degrees |
Glazing Vision recommends a pitch of at least 5° for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Flushglaze Fixed Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The standard Flushglaze Rooflight has been thoroughly tested and achieved the following classification results:
Size: 2000 mm span x 2500 mm width, Pitch: 0°
Air Permeability - EN 12207 - Class 4 + 600Pa
Water Tightness - EN 12208 - Class 9A 600Pa
The Flushglaze Fixed Rooflight has been expertly designed with security as a priority - The product is tested to LPS2081 Issue 1:2015, approved by the Loss Prevention Certification Board (Cert/LPCB ref: 1347a) and Secured by Design.
To achieve Security Rating A, the inner pane must be at least 8.8 mm PVB laminated glass (two 4 mm thick panes separated by an 0.8 mm thick PVB interlayer).
To achieve Security Rating B, the inner pane must be at least 9.5 mm ionomer laminated glass (two 4 mm thick panes separated by a 1.5 mm thick ionomer interlayer).
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on
Flushglaze Fixed Rooflight
Flushglaze Circular Fixed Rooflight
Flushglaze Wall Abutted Rooflight
Flushglaze Eaves Rooflight
Flushglaze Walk On Rooflight
Flushglaze Fixed Multipart Rooflight
Downloads
Specification
Manuals & guides
CAD & BIM
Speak to an Expert
Technical Specification Manager details not found
We're sorry, but we couldn't find a Technical Specification Manager for this area.