Our team will give you expert advice and guidance on the entire design and specification process including our extensive product range, including key considerations and optional extras and our dedicated bespoke service
Elevate Your Space with Every Step
The Glazing Vision Flushglaze Walk On Rooflight offers a unique, durable and aesthetic solution for high-value external areas like roof terraces, balconies, and rooftop gardens.
Its innovative design ensures a flow of natural daylight into the rooms below, nurturing brighter environments which are proven to enhance occupant mood and reduce the need for artificial lighting.
To deliver a perfectly integrated rooflight, the Walk On Rooflight is typically installed flush with surrounding decking, maximising the usable space of the outdoor area.
Key features
Optional extras
Discuss Your Project With Us
Technical Specification Manager details not found
We're sorry, but we couldn't find a Technical Specification Manager for this area.
Your TSM
Specification
Min Span |
400mm |
Max Span |
4131mm |
Min Width |
400mm |
Max Width |
4131mm |
Min upstand pitch |
1 degree |
Max upstand pitch |
70 degrees |
Glazing Vision recommends a pitch of 1 degree for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Flushglaze Walk On Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The Walk On Flushglaze Rooflight has been thoroughly tested and achieved the following classification results:
Size: 2000 mm span x 2500 mm width, Pitch: 0°
Air Permeability - EN 12207 - Class 4 + 600Pa
Water Tightness - EN 12208 - Class 9A 600Pa
The Flushglaze Walk On Rooflight has been expertly designed with security as a priority - The product is tested to LPS2081 Issue 1:2015, approved by the Loss Prevention Certification Board (Cert/LPCB ref: 1347a) and Secured by Design.
To achieve Security Rating A, the inner pane must be at least 8.8 mm PVB laminated glass (two 4 mm thick panes separated by an 0.8 mm thick PVB interlayer).
To achieve Security Rating B, the inner pane must be at least 9.5 mm ionomer laminated glass (two 4 mm thick panes separated by a 1.5 mm thick ionomer interlayer).
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on
Flushglaze Walk On Rooflight
Flushglaze Fixed Rooflight
Flushglaze Fixed Multipart Rooflight
Flushglaze Wall Abutted Rooflight
Flushglaze Eaves Rooflight