Our team will give you expert advice and guidance on the entire design and specification process including our extensive product range, including key considerations and optional extras and our dedicated bespoke service
Integrate effortlessly into your building
Glazing Vision's Flushglaze Wall Abutted Rooflight achieves stunning 'frameless' internal views, channeling the maximum amount of natural daylight into any property.
Engineered for a durable integration, the fixed rooflight is designed to abut to the building on up to three sides. This clever solution allows daylight to filtrate tight or overlooked areas, enhancing occupant wellbeing and reducing reliance on artificial light.
The wall abutment framework is engineered for secure, structure-dependent fixing - The unit must be pitched away from the abutment to manage water flow, and the abutment frame requires proper flashing to guarantee long-term weather resistance.
This detail is available on a number of Glazing Vision Flushglaze Rooflights, including solo and multi-part units, as well as walk on Flushglaze units.
Key features
Optional extras
Discuss Your Project
Technical Specification Manager details not found
We're sorry, but we couldn't find a Technical Specification Manager for this area.
Your TSM
Specification
Min span |
400mm |
Max span |
4131mm |
Min width |
400mm |
Max width |
4131mm |
Min upstand pitch |
3 degrees |
Max upstand pitch |
70 degrees |
Glazing Vision recommends a pitch of at least 5° for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Flushglaze Wall Abutted Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor.
The Flushglaze Wall Abutted Rooflight has been expertly designed with security as a priority - The product is tested to LPS2081 Issue 1:2015, approved by the Loss Prevention Certification Board (Cert/LPCB ref: 1347a) and Secured by Design.
To achieve Security Rating A, the inner pane must be at least 8.8 mm PVB laminated glass (two 4 mm thick panes separated by an 0.8 mm thick PVB interlayer).
To achieve Security Rating B, the inner pane must be at least 9.5 mm ionomer laminated glass (two 4 mm thick panes separated by a 1.5 mm thick ionomer interlayer).
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on
Flushglaze Wall Abutted Rooflight
Flushglaze Fixed Rooflight
Flushglaze Fixed Multipart Rooflight
Flushglaze Circular Fixed Rooflight
Flushglaze Eaves Rooflight
Flushglaze Walk On Rooflight