Elevate Your Space with Every Step
Whether you require a solution for your roof terrace, balcony, or rooftop garden, the Glazing Vision Flushglaze Walk-On Rooflight provides the ultimate combination of durability and aesthetics for any property, allowing natural daylight to flow into the room(s) below without compromising usable space.
Constructed from toughened laminated glass, the Flushglaze Walk-On Rooflight is manufactured to withstand regular foot traffic in UK domestic applications with uniform loading’s of 1.5kN/m² and concentrated loading’s of 2.0kN in accordance with EN 1991-1-1-1:2002.
The Flushglaze Walk On Rooflights are commonly installed using decking to achieve a flush finish with the rooflight as an upstand is still required.
Key features
Optional extras
Specification
Min Span |
400mm |
Max Span |
4131mm |
Min Width |
400mm |
Max Width |
4131mm |
Min upstand pitch |
1 degree |
Max upstand pitch |
70 degrees |
Glazing Vision recommends a pitch of 1 degree for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Flushglaze Walk On Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The Walk On Flushglaze Rooflight has been thoroughly tested and achieved the following classification results:
Size: 2000 mm span x 2500 mm width, Pitch: 0°
Air Permeability - EN 12207 - Class 4 + 600Pa
Water Tightness - EN 12208 - Class 9A 600Pa
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on

Flushglaze Walk On Rooflight

Flushglaze Fixed Rooflight

Flushglaze Fixed Multipart Rooflight

Flushglaze Eaves Rooflight
Downloads
Specification
Manuals & guides
CAD & BIM
Frequently Asked Questions
Yes, you will still require an upstand for the Flushglaze Walk On Rooflight, you will need to construct your upstand with a minimum thickness of 100mm and a minimum height of 150mm.
The Glazing Vision Walk On Rooflight can withstand regular foot traffic in UK domestic applications with uniform loadings of 1.5kN/m² and concentrated loadings of 2.0kN.
The Glazing Vision Flushglaze Walk On Rooflight is required to be installed at a 1 degree pitch to facilitate water runoff.
Glass can become slippery when wet therefore applying an anti-slip glass surface finish to the glass should always be considered to ensure the safety of all people using the walk on rooflight. We commonly see sandblasted or fritted glass being specified for slip resistance.