Effortlessly Embrace Natural Daylight & Ventilation
The Glazing Vision VisionVent Rooflight is designed to provide a combination of natural daylight and natural ventilation to your space, it has been specifically designed by our specialist in-house team for ventilation purposes, offering smooth and reliable operation in three ways; Manual, Electric or Chain-Actuated.
The manually operated VisionVent opens using a screw jack mechanism which is mounted inside the internal aperture and opened using a telescopic crank handle.
The chain actuated VisionVent is powered open by an integrated chain drive unit which is seamlessly housed within the rooflight frame.
The electrically operated VisionVent is driven by twin drive synchronised mechanisms, which allows larger sizes to be manufactured and full connectivity to extra options such as remote control and building management systems.
Each VisionVent unit features dual colour, thermally broken framework and is supplied with heat soak tested low e toughened glass as standard.
Key features
Optional extras
Specification
Min span |
415mm |
Max span |
2365mm |
Min width |
415mm |
Max width |
2365mm |
Min area |
0.17 m2 |
Max area |
2.25 m2 |
Min upstand pitch |
3 degrees |
Max upstand pitch |
70 degrees |
Glazing Vision recommends a pitch of at least 5° for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Min span |
808mm |
Max span |
2365mm |
Min width |
1000mm |
Max width |
2400mm |
Min area |
0.80 m2 |
Max area |
2.25 m2 |
Min upstand pitch |
3 degrees |
Max upstand pitch |
70 degrees |
Glazing Vision recommends a pitch of at least 5° for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Min span |
808mm |
Max span |
2365mm |
Min width |
845mm |
Max width |
2400mm |
Min upstand pitch |
3 degrees |
Max upstand pitch |
70 degrees |
Glazing Vision recommends a pitch of at least 5° for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Manual, Electric and Chain Actuated VisionVent Rooflights is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The range of VisionVent Rooflights have been thoroughly tested.
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on

Visionvent Vent Only Rooflight

Skydoor Hinged Access Rooflight

Free Standing Skybox Rooflight

Three Wall Box Rooflight
Downloads
Specification
Manuals & guides
CAD & BIM
Frequently Asked Questions
Considerations need to be taken where the Manual VisionVent is installed as it requires accessibility from below as it is opened with a telescopic crank handle. We recommend installation of up to 3m above floor level
Fixed rooflights boast a benefit that opening rooflights do not, they are not restricted in their placement as no moving elements need to be considered. However multiple considerations need to be taken, for example if the roof is strong enough to hold the additional weight of a rooflight or if the rooflight will be in a location that receives enough natural daylight.
If you opt for EnduroShield Easy Clean treatment, the chemically bonded treatment will keep the glass clean as any dirt will run off of the glass - An occasional clean with a non abrasive cleaning solution will ensure that the glass looks as good as new.
Yes, all of our flat rooflights require an upstand, the minimum requirements for your upstand will be outlined in the product data sheets.