Effortlessly Maximise Natural Daylight Below
The Glazing Vision Fixed Pyramid Rooflight is expertly manufactured by our in-house team as standard at 45° utilising glass to glass joins and structural silicone seals with minimum visible internal structure maximising the natural daylight flow in the room below.
The Fixed Pyramid Rooflight features dual-colour, thermally broken framework as standard with Qualicoat approved RAL 7015 Slate Grey outer and RAL 9010 Pure White inner.
The optional down lighters are integrated into the apex cap, turning the rooflight into a stunning architectural feature at night.
Key features
Optional extras
Specification
Min span/width |
600mm |
Max span/width |
1500mm |
Min upstand pitch |
0 degrees |
Max upstand pitch |
0 degrees |
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Fixed Pyramid Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The standard Pyramid Rooflight has been thoroughly tested.
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on

Fixed Pyramid Rooflight

Fixed Lantern Rooflight

Flushglaze Fixed Rooflight

Flushglaze Fixed Multipart Rooflight

Flushglaze Eaves Rooflight
Downloads
Specification
Manuals & guides
CAD & BIM
Frequently Asked Questions
Select Glazing Vision flat rooflights can be installed at a pitch of up to 70 degrees such as the Flushglaze Fixed Rooflight, however if your roof pitch exceeds this, you will need to install a roof window.
No, you can not order just the glass from us as we assemble the entire rooflight unit in our in house factory to ensure a high level of quality.
No, unlike some “flat-pack” like rooflights seen on the market, we do not assemble the rooflights on site, they are assembled in our in-house factory to ensure quality. Assembling your unit on site introduces unnecessary risks that could compromise the performance of your rooflight.