Effortlessly Maximise Natural Daylight Below
The Glazing Vision Fixed Pyramid Rooflight is expertly manufactured by our in-house team as standard at 45° utilising glass to glass joins and structural silicone seals with minimum visible internal structure maximising the natural daylight flow in the room below.
The optional down lighters are integrated into the apex cap, turning the rooflight into a stunning architectural feature at night.
Trusted and widely installed in prestigious projects throughout Europe, the Square Pyramid Rooflight represents a premium solution for architects seeking reliability, energy efficiency, and aesthetic excellence, increasing natural daylight seamlessly.
Detailed technical documentation, including thermal performance data and installation guidelines, is available to assist architects and builders in specifying and integrating this rooflight seamlessly into any project.
Key features
Optional extras
Specification
Min span/width |
600mm |
Max span/width |
1500mm |
Min upstand pitch |
0 degrees |
Max upstand pitch |
0 degrees |
Note that the minimum and maximum span, width and pitch are dependent on various factors, our team will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting our dedicated team.
Structural integrity of the Fixed Pyramid Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from our team. The standard Pyramid Rooflight has been thoroughly tested.
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
Accès
Praticable
Résidentiel
Résistance au feu
Toit en pente
Toiture plate
Ventilation

Fixed Pyramid Rooflight

Lanterneau fixe

Ouverture Zénithale Fixe Flushglaze

Flushglaze Fixed Multipart Rooflight

Ouverture zénithale Flushglaze
Downloads
Specification
Manuals & guides
CAD & BIM
Frequently Asked Questions
Certaines fenêtres de toit plates Glazing Vision, comme la Flushglaze Fixed Rooflight peuvent être installées sur une toiture avec une pente allant jusqu’à 70 degrés. Cependant, si la pente de votre toit dépasse cette valeur, il sera nécessaire d’installer une fenêtre de toit traditionnelle.
Non, il n’est pas possible de commander uniquement le vitrage, car nous assemblons l’ensemble de l’ouverture zénithale dans notre usine, afin de garantir un niveau de qualité élevé.
Non, contrairement à certaines ouvertures zénithales vendues en kit sur le marché, nous n’assemblons pas les ouvertures sur site. Elles sont assemblées dans notre usine interne afin de garantir la qualité. Assembler votre unité sur site introduirait des risques inutiles pouvant compromettre la performance de votre ouverture zénithale.