Our team will give you expert advice and guidance on the entire design and specification process, including our extensive product range, key considerations, optional extras, and our dedicated bespoke service
Designed to blend seamlessly while transforming spaces
The Flushglaze Fixed Circular Rooflight is a simple yet striking way to fill your space with natural daylight. Its frameless, flush design means all you see is open sky from inside. The Circular Flushglaze is perfect for adding a sense of calm and openness to any room, whether in a Dublin townhouse or a coastal home in Galway.
Built from high-quality materials, the Circular Rooflight has been designed to withstand Ireland’s varied climate and perform reliably. Each unit is carefully made to suit your project, whether you’re working on a one-off home renovation or a larger commercial build.
You can also choose to personalise your rooflight with a special frame colour (Standard finish: RAL 7015 Slate Grey) or varied glass specifications, making it a seamless part of your architecture while letting the light take centre stage.
Key features
Optional extras
Discuss Your Project
Get In Touch
Tell us all about your project, and our team will be in touch to discuss
Our team will be in touch to discuss your project and requirements.
Your TSM
Specification
Min diameter |
669mm |
Max diameter |
2000mm |
Min Upstand Pitch |
3 degrees |
Max Upstand Pitch |
70 degrees |
Glazing Vision recommends a pitch of at least 5° for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, our team will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting our team.
Structural integrity of the Flushglaze Circular Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The standard Flushglaze Rooflight has been thoroughly tested and achieved the following classification results:
Size: 2000 mm span x 2500 mm width, Pitch: 0°
Air Permeability - EN 12207 - Class 4 + 600Pa
Water Tightness - EN 12208 - Class 9A 600Pa
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
access
fire-rated
flat-roof
pitched-roof
residential
ventilation
walk-on

Flushglaze Circular Fixed Rooflight

Flushglaze Fixed Rooflight

Flushglaze Fixed Multipart Rooflight

Flushglaze Eaves Rooflight

Flushglaze Walk On Rooflight

Ridgeglaze Fixed Rooflight
Downloads
Specification
Manuals & guides
CAD & BIM
Frequently Asked Questions
Select Glazing Vision flat rooflights can be installed at a pitch of up to 70 degrees such as the Flushglaze Fixed Rooflight, however if your roof pitch exceeds this, you will need to install a roof window.
Yes, all of our flat rooflights require an upstand, the minimum requirements for your upstand will be outlined in the product data sheets.
The width of your kerb varies depending on the product chosen, for example our Fixed Flushglaze will require a minimum structural upstand of 75mm.