Our team will give you expert advice and guidance on the entire design and specification process, including our extensive product range, key considerations, optional extras, and our dedicated bespoke service
Elevate Your Space with Every Step
Whether you are upgrading a roof terrace, adding daylight to a balcony, or creating a rooftop garden, the Glazing Vision Flushglaze Walk-On Rooflight offers the perfect mix of durability and style. It is designed to let natural daylight flood into the room below without reducing your usable outdoor space, making it ideal for homes and commercial projects in Dublin, Cork, Galway, and beyond.
The Flushglaze Walk-On Rooflight is engineered to withstand regular foot traffic in domestic settings, meeting uniform loadings of 1.5 kN/m² and concentrated loadings of 2.0 kN per EN 1991-1-1-1:2002.
For a seamless finish, Flushglaze Walk-On Rooflights are installed flush with the surrounding decking, so the surface sits flush with the glass, resulting in a clean and contemporary look that blends perfectly into your outdoor space while brightening the interior below.
Key features
Optional extras
Discuss Your Project
Get In Touch
Tell us all about your project, and our team will be in touch to discuss
Our team will be in touch to discuss your project and requirements.
Your TSM
Specification
Min Span |
400mm |
Max Span |
4131mm |
Min Width |
400mm |
Max Width |
4131mm |
Min upstand pitch |
1 degree |
Max upstand pitch |
70 degrees |
Glazing Vision recommends a pitch of 1 degree for standard units.
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the Flushglaze Walk On Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The Walk On Flushglaze Rooflight has been thoroughly tested and achieved the following classification results:
Size: 2000 mm span x 2500 mm width, Pitch: 0°
Air Permeability - EN 12207 - Class 4 + 600Pa
Water Tightness - EN 12208 - Class 9A 600Pa
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Compare with other products
access
fire-rated
flat-roof
pitched-roof
residential
ventilation
walk-on

Flushglaze Walk On Rooflight

Flushglaze Fixed Rooflight

Flushglaze Fixed Multipart Rooflight

Flushglaze Eaves Rooflight
Downloads
Specification
Manuals & guides
CAD & BIM
Frequently Asked Questions
Yes, you will still require an upstand for the Flushglaze Walk On Rooflight, you will need to construct your upstand with a minimum thickness of 100mm and a minimum height of 150mm.
The Glazing Vision Flushglaze Walk On Rooflight is required to be installed at a 1 degree pitch to facilitate water runoff.
Glass can become slippery when wet therefore applying an anti-slip glass surface finish to the glass should always be considered to ensure the safety of all people using the walk on rooflight. We commonly see sandblasted or fritted glass being specified for slip resistance.