Our team will give you expert advice and guidance on the entire design and specification process including our extensive product range, including key considerations and optional extras and our dedicated bespoke service
Bring The Outdoors, Indoors
Flat roof
The Glazing Vision Flushglaze Eaves Rooflight comprises of two or more glazed sections, installed in both vertical and horizontal planes and joined together with a structural silicone seal allowing building occupants to be seamlessly connected to the outside nature from inside.
The Flushglaze Eaves Rooflight can be utilised in biophilic design practice by bringing the outdoors inside through the minimal internal framework, allowing abundant natural daylight to flow into the interior space.
The Eaves Rooflight has been commonly used to form a glazed link between two buildings in both residential and commercial applications - Glazing Vision has designed and manufactured bespoke Eaves units that span multiple storeys high, and almost 20 meters deep.
Key features
Optional extras
Specification
Min Span |
400mm |
Max Span |
4000mm |
Min Width |
400mm |
Max Width |
2000mm |
Min Height |
400mm |
Max Height |
4000mm |
Min Wall Offset |
0mm |
Max Wall Offset |
100mm |
Min Top Section Area |
0.16 m2 |
Max Top Section Area |
5.2 m2 |
Min Vertical Section Area |
0.16 m2 |
Max Vertical Section Area |
5.2 m2 |
Min Top Section Pitch |
3 degrees |
Max Top Section Pitch |
45 degrees |
Glazing Vision recommends a top section pitch of at least 5°
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the minimalist Flushglaze Eaves Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor. The standard Eaves Rooflight has been thoroughly tested.
The Flushglaze Eaves Rooflight has been specially designed with security as a priority - The rooflight has been extensively tested and accredited to LPS2081 Issue 1:2015, approved by the Loss Prevention Certification Board (Cert/LPCB ref: 1347a) and Secured by Design.
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Standards
Made in Britain
Glazing Vision rooflights are assembled on site in our rural Norfolk factory to ensure a high quality product - Made in Britain, trusted internationally.
ISO 9001 & ISO 14001
Glazing Vision operates to BSI ISO9001 and ISO14001 standards to ensure high quality rooflights
Secured by Design
Glazing Vision rooflights have been extensively tested and Secured by Design
Approved by the BBA
Glazing Vision rooflights have been approved by the BBA, with our Flushglaze Rooflight being the first flat rooflight ever approved by BBA
Approved by the LPCB
Glazing Vision Rooflights have been approved by the Loss Prevention Certification Board, allowing them to meet enhanced security requirements.
QualiCoat Applicator
Glazing Vision rooflights feature QualiCoat approved aluminum framework to ensure a high quality paint finish
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on
Flushglaze Eaves Rooflight
Flushglaze Fixed Rooflight
Flushglaze Fixed Multipart Rooflight
Flushglaze Fixed Circular Rooflight
Flushglaze Wall Abutted Rooflight
Flushglaze Walk On Rooflight
Ridgeglaze Fixed Rooflight
Manuals & guides
CAD & BIM
Frequently Asked Questions
Glazing Vision understands that choosing the right rooflight for your property is an important decision. To help, we've compiled answers to some of the most frequently asked questions about our Eaves Flushglaze Rooflight - If you have a question that is not listed here, feel free to contact our experienced team.
If you opt for EnduroShield Easy Clean treatment, the chemically bonded treatment will keep the glass clean as any dirt will run off of the glass - An occasional clean with a non abrasive cleaning solution will ensure that the glass looks as good as new.
If you require a Flushglaze Eaves Rooflight that is larger than our maximum dimensions, we can design a Multi-Part Eaves Rooflight.
No, Glazing Vision’s clever design means that your rooflight boasts minimal to no internal framework, allowing you to have Sky Only Views looking out of the unit.
Yes, all Glazing Vision rooflights are manufactured at our in-house factory in rural Norfolk, this ensures that every rooflight leaving the factory is of the highest quality.
Lead times vary per product as they are carefully assembled and tested in-house, but your local Technical Sales Manager can advise you of our latest lead times.
Related Case Studies
The Flushglaze Eaves Rooflight has transformed properties across the globe through the transformative beauty of connecting the inside to the outside nature.
