Our team will give you expert advice and guidance on the entire design and specification process including our extensive product range, including key considerations and optional extras and our dedicated bespoke service
Elevate your space with light and elegance
Pitched roof
The Ridgeglaze Fixed Rooflight is an elegant glass ridge rooflight designed to be installed over the apex of your pitched roof and allow glazing on both returns to maximise the amount of natural daylight entering the property below.
Its frameless internal finish delivers a clean, modern look in any property whilst adding a striking touch when viewing the property from the outside.
The Glazing Vision RidgeGlaze Rooflight can be manufactured using a variety of different glass specifications, from thermally efficient triple glazed glass to Secured by Design laminated glass or solar control units to reduce heat build up in the summer, which is especially prevalent in commercial settings.
Key features
Optional extras
Specification
Min span (Each side) |
500mm |
Max span (Each side) |
3000mm |
Min width |
400mm |
Max width |
2000mm |
Min upstand pitch |
10 degrees |
Max upstand pitch |
50 degrees |
Note that the minimum and maximum span, width and pitch are dependent on various factors, your technical sales advisor will be happy to advise on these. Further information on upstand requirements and product dimensions can be found on our website or by contacting your technical sales advisor.
Structural integrity of the RidgeGlaze Fixed Rooflight is assured through the use of finite element analysis (FEA) and testing. Further information and specific performance details can be obtained from your Technical Sales Advisor.
The RidgeGlaze Fixed Rooflight has been expertly designed with security in mind - The product is approved by the Loss Prevention Certification Board (Cert/LPCB ref: 1347a) and Secured by Design.
To achieve Security Rating A, the inner pane must be at least 8.8 mm PVB laminated glass (two 4 mm thick panes separated by an 0.8 mm thick PVB interlayer).
To achieve Security Rating B, the inner pane must be at least 9.5 mm ionomer laminated glass (two 4 mm thick panes separated by a 1.5 mm thick ionomer interlayer).
Please contact our team if you have off-spec requirements for dimensions, glass or anything else, we’ll be happy to assist
Standards
Awards and certifications
Made in Britain
Glazing Vision rooflights are assembled on site in our rural Norfolk factory to ensure a high quality product - Made in Britain, trusted internationally.
RIBA Providers Network member
Glazing Vision provides a number of comprehensive RIBA Certified CPDs to the architectural community.
ISO 9001 & ISO 14001
Glazing Vision operates to BSI ISO9001 and ISO14001 standards to ensure high quality rooflights
Secured by Design
Glazing Vision rooflights have been extensively tested and Secured by Design
Approved by the LPCB
Glazing Vision Rooflights have been approved by the Loss Prevention Certification Board, allowing them to meet enhanced security requirements.
QualiCoat Applicator
Glazing Vision rooflights feature QualiCoat approved aluminum framework to ensure a high quality paint finish
Compare with other products
Access
Fire rated
Flat roof
Pitched roof
Residential
Ventilation
Walk on
Ridgeglaze Fixed Rooflight
Flushglaze Fixed Rooflight
Flushglaze Fixed Multipart Rooflight
Flushglaze Wall Abutted Rooflight
Flushglaze Eaves Rooflight
Flushglaze Walk On Rooflight
Manuals & guides
CAD & BIM
Frequently Asked Questions
Glazing Vision understands that choosing the right rooflight for your property is an important decision. To help, we've compiled answers to some of the most frequently asked questions about our Fixed RidgeGlaze0 Rooflight - If you have a question that is not listed here, feel free to contact our experienced team.
No, you can not order just the glass from us as we assemble the entire rooflight unit in our in house factory to ensure a high level of quality.
No, Glazing Vision’s clever design means that your rooflight boasts minimal to no internal framework, allowing you to have Sky Only Views looking out of the unit.
Many rooflight projects do not require planning permission, as the installation of rooflights is seen as a ‘Permitted Development’ - This is as long as the rooflight does not protrude more than 150mm above the roof plane and no part of it is higher than the highest point on the existing roof.
Lead times vary per product as they are carefully assembled and tested in-house, but your local Technical Sales Manager can advise you of our latest lead times.
Yes, all Glazing Vision rooflights are manufactured at our in-house factory in rural Norfolk, this ensures that every rooflight leaving the factory is of the highest quality.
Related Case Studies
The Glazing Vision RidgeGlaze Rooflight has transformed rooftops across the globe with its sleek yet stylish appearance.
